solvent-based adhesive

Experimental method of preparing solvent-adhesive by many kinds of acrylic esters as unit was studied.

研究了用多种丙烯酸酯类单体制备溶 剂型 胶粘剂的试验方法.

The prepared ink has good solution viscosity , surface force, solvent resistance and adhesive capacity.

墨水溶液粘度 、 表面张力及耐溶剂性能、粘附性能均较佳.

The use of adhesive resin coated, typically a solvent-based adhesives.

覆膜使用的粘合剂, 一般为溶剂型粘合剂.

A solvent-free room-temperature curable two-component PU adhesive was prepared, it has higher adhesion strengths and excellent toughness. The shear strength at room-temperature was 37.1 MPa and the shear strength at 200 ℃ was 3.8 MPa, and the tensile elongation at break still was 104%.

研制了一种室温固化无溶剂双组分聚氨酯胶黏剂，具有较高的黏接强度及良好的韧性，在保持室温剪切强度为37.1MPa的同时，扯断伸长率为104%，200℃仍有3.8MPa的强度；

Hot melt adhesive is a kind of non-solvent, 100% fixed component thermal plasticity material.

热溶胶是一种不含任何溶剂，为100%固定成份热可塑性物质。

The bonding methods used in micro assembly includes adhesive bonding, thermal bonding, solvent bonding, laser bonding, etc, which have limits in some respects.

目前应用于聚合物微装配的联接方法主要有胶粘接、热键合、溶剂键合、激光键合等，以上方法均在某些方面存在着各自的局限性。